⚡ Free 24-hour quotes across LA County · Same-day service available for emergencies
Licensed Electrical Services in Los Angeles (C-10)

Outlet, Switch & GFCI Repair, Replacement & Installation

Sparking outlet? Broken dimmer? Need to upgrade your home to modern safety standards? We quickly and cleanly resolve any electrical point issues in your home.

🔥 Special Offer: Expert Diagnostic for Only $49! We will check up to 2 outlets or 1 fixture and find the exact root cause of the failure.

✓ Arrival in 60–90 minutes ✓ Cleanliness Guarantee (we wear shoe covers) ✓ Insured & Licensed

Noticed these signs? Don't try to fix it yourself.

Faulty outlets and switches are one of the leading causes of house fires. Call us immediately if you experience:

Sparking or Crackling

Any sounds or sparks when plugging in an appliance indicate dangerous electrical arcing, which leads to fires.

Burning or Melting Smell

A burning plastic smell is a critical sign that the contacts inside the wall are already melting and deteriorating.

Outlet Won't Hold a Plug

Worn-out, loose contacts cause severe overheating because electricity has to jump across a gap to complete the circuit.

Wall Shocks You

Even a slight shock or tingle from a switch or appliance is a critical sign of a missing ground connection or a short circuit.

What We Do

From simple repairs to smart home upgrades, our fully stocked vans are ready for any task.

GFCI Installation & Repair

GFCI outlets are mandatory by modern building codes for all wet areas (kitchens, bathrooms, garages, outdoors). They instantly cut power upon contact with water, saving lives. If your GFCI won't reset, we will find and fix the problem.

Outlet & Switch Replacement

We replace old, worn-out, or yellowed devices with modern, safe, and aesthetically pleasing commercial-grade components.

Smart Dimmers & Timers

Installation of LED-compatible dimmers, USB/USB-C fast charging outlets, and Smart Switches for comfortable and efficient lighting control.

Adding New Outlets

Is your home tangled in extension cords? We will carefully run new lines and add outlets exactly where you need them without unnecessary drywall damage.

The Outlet is Just the Tip of the Iceberg

Often, a dead outlet signals global problems hiding inside your walls.

Do you have dangerous Aluminum Wiring?

If your home was built in the 1960s or 1970s, dangerous aluminum wiring might be hiding inside. Aluminum expands when heated, loosening connections precisely at the outlets. This is the #1 cause of electrical fires in older homes.

During our $49 diagnostic, our electrician will check your wiring type. If the connections are unsafe, we will propose installing reliable AlumiConn connectors or a complete network modernization to permanently protect your home.

You Pay for the Result, Not the Hours.

Upfront Flat-Rate Pricing

No surprises. You will know the exact cost of the installation or repair before our electrician even picks up a tool.

Fully Stocked Vans

Our trucks are rolling warehouses stocked with thousands of parts. In 99% of cases, we replace outlets and switches in a single visit.

Lifetime Warranty

We are confident in our quality. If an outlet we installed fails due to poor workmanship, we will replace it for free.

Respect For Your Home

Our electricians always work wearing shoe covers and use drop cloths. We guarantee to leave the repair area cleaner than it was before we arrived.

Frequently Asked Questions

Can I replace the outlet myself?

DIY outlet replacement is a common cause of electrical shocks, reverse-polarity issues, and safety code violations. Even a slightly loose wire can cause an arc fault and start a fire. Leave it to a licensed professional.

How much does it cost to replace one outlet?

The standard cost for replacement work ranges from $75 to $200 (labor only), depending on the complexity and condition of your wiring. The electrician will provide the exact figure after diagnosing your network.

What should I do if I lost power in one room?

Take advantage of our $49 diagnostic special. Our expert electrician will use professional thermal imagers and circuit tracers to find the exact location of the break or short circuit in your walls.

Do you charge by the hour or by the job?

We use upfront flat-rate pricing. When our electrician arrives, they will diagnose the problem and give you a total price for the repair. You pay for the result, not the time it takes. If a job takes longer than expected, you won't pay a penny more.

Will the electrician leave a mess in my house?

Absolutely not. Our Cleanliness Guarantee means our technicians always wear shoe covers, use drop cloths under their work areas, and clean up completely before they leave. We treat your home with the utmost respect.

Are your electricians fully licensed and insured?

Yes. KiloWire Electric holds both a C-10 Electrical Contractor license and a Class B General Contractor license. We are fully bonded and carry comprehensive liability insurance, meaning you and your property are completely protected during any repair.