Whole-House & Partial Electrical Rewiring. Make your home safe and ready for modern power demands!
Was your home built before 1980? Old aluminum wiring or knob-and-tube systems are hidden fire hazards. We provide turnkey electrical modernization with a 1-year workmanship warranty.
🔥 Free On-Site Rewiring Estimate! Flexible financing available for major projects.
Why is old wiring a ticking time bomb?
Many California homes built decades ago hide dangerous technology inside their walls:
Aluminum Wiring (1960s–1970s)
Aluminum expands and contracts more than copper. Over time, this loosens connections at outlets and switches, causing severe overheating and a high risk of electrical fires.
Knob-and-Tube Wiring (1930s)
This outdated system physically cannot handle the load of modern appliances (ACs, microwaves) and completely fails to meet today's safety standards and building codes.
6 signs you urgently need to rewire
Don't wait for a short circuit. Contact us immediately if you notice any of these symptoms:
Strange Odors
A burning or melting plastic smell from outlets is a clear sign of hidden overheating inside the wall.
Flickering Lights
If your lights dim when turning on heavy appliances, your home network is overloaded.
Sparking and Crackling
Sounds coming from switches indicate electrical arcing, which highly correlates with fire hazards.
Tripping Breakers
Your circuit breaker trips frequently because old wires cannot handle the modern electrical load.
Not Enough Outlets
If your entire home is tangled in power strips and extension cords, your wiring is hopelessly outdated.
Hot Outlets
If the plastic around an outlet or switch feels warm to the touch, it indicates critical overheating of the contacts.
Specialized Rewiring Engineering
We don't cut corners. From full copper replacement to minimally invasive AlumiConn pigtailing, our solutions are engineered for long-term safety and building code compliance.
Full Replacement Whole-House Romex Modernization
Replacing brittle, ungrounded conductors with modern, non-metallic sheathed pure copper cabling (Romex NM-B) rated for modern continuous residential loads.
Non-Invasive Retrofit UL-Listed AlumiConn Aluminum Pigtailing
Remediate dangerous 1960s–70s aluminum branch wiring without full drywall demolition. We install CPSC-approved AlumiConn mechanical lug connectors torqued to exact inch-pounds.
Historic Protection Knob-and-Tube Decommissioning
Completely isolate and replace obsolete knob-and-tube runs buried in attic thermal insulation, eliminating intense fire hazards and restoring homeowner policy insurability.
Dual C-10 & Class B Surgical Openings & Drywall Patching
With our dual C-10 Electrical and Class B General Building licenses, we minimize wall cuts and provide seamless Level 4 drywall patching and texture matching upon project completion.
What's Included in Every Rewiring Project
We deliver complete peace of mind with an upfront flat rate and zero surprise change orders.
Turnkey Rewiring Process
We work room-by-room, keeping power active throughout the rest of your home so you can live comfortably during the project.
In-Depth Inspection & Mapping
We perform thermal imaging, test circuit continuity, map all wire pathways, and provide an upfront flat-rate proposal with zero hidden costs.
Permits & Protective Prep
We pull official permits with LADBS, mask your flooring and furniture with heavy plastic, and prepare surgical wall access points.
Copper Pull & AFCI Protection
Our Journeyman electricians fish fresh copper cables, install tamper-resistant outlets, hook up AFCI breakers, and test every circuit under load.
City Sign-Off & Drywall Patch
We attend the city inspection walkthrough, obtain final permit sign-off, patch access openings seamlessly, and clean up with HEPA filtration.
Frequently Asked Questions (FAQ)
Do I need to tear down all my walls for the repair?
Not always. For aluminum wiring, we can use certified AlumiConn connectors inside existing junction boxes. This ensures reliable contacts without the need to demolish walls.
How much does it cost?
The cost depends on the size of your home, wiring accessibility, and the chosen solution. That's why we offer a free on-site engineering visit to provide an accurate flat-rate estimate.
Do you offer financing?
Yes, we offer convenient installment programs. You can make your home fully safe right now while paying a comfortable monthly amount.
Do you offer a warranty on rewiring?
We provide a 1-year workmanship warranty on our whole-house rewiring work. We use premium copper and quality materials. Your safety is our main priority.
Will we have to move out during the repair?
In 90% of cases — no. We work in phases (room by room), keeping electricity on in the rest of the house. At the end of every day, we vacuum and remove all debris so you can comfortably stay in your home.
Do you handle communications with city inspectors?
Absolutely. Rewiring requires a mandatory city permit. We take on all the bureaucracy, applications, and official inspections to take that headache away from you.
Combine Rewiring With Key Electrical Upgrades
Rewiring is often done alongside service panel upgrades and smart safety devices to maximize efficiency and pass city inspections in a single visit.
Main Electrical Panel Upgrade
Upgrade to 200A or 400A service so your newly wired circuits have plenty of safe capacity.
Explore Panel Upgrades →Panel Upgrade Cost Calculator
Get an instant itemized preliminary cost estimate for your home's electrical service.
Launch Calculator →Permits & Inspection Coordination
We pull city permits with LADBS and coordinate final inspector sign-offs on your behalf.
Permit Coordination Details →Insurance Compliance Retrofits
Satisfy California homeowner's insurance mandates and clear non-renewal risk notices.
Insurance Compliance →Helpful Guides on
Wiring Hazards & Home Safety
Read expert articles on identifying electrical fire hazards, obsolete panels, and California safety standards.
100-Amp Panel Overload: EV Charger and A/C Fire Risk
A real emergency call: why a Level 2 EV charger and air conditioner on a 100-amp panel can overload the system, and the safe options to fix it.
Read guide →Why Insurers Cancel Policies Over Old Panels and Wiring
Why some California insurers flag Zinsco and Federal Pacific panels and knob-and-tube wiring, what inspectors look for, and how to document upgrades.
Read guide →Flickering Lights, Tripping Breakers: Causes and When to Call
What flickering lights, tripping breakers and warm outlets mean in Los Angeles homes, what an electrician checks, and when to call for help right away.
Read guide →